Scientific Linux Forum.org



  Reply to this topicStart new topicStart Poll

> RT2870 based wireless usb device, It didn't work help me pls
kuheylan
 Posted: Sep 30 2011, 05:23 PM
Quote Post


SLF Newbie


Group: Members
Posts: 11
Member No.: 888
Joined: 30-September 11









Hi,

I'm a new member of scientific linux user's. I have a problem about wireless network.

I have Airties 2310 Usb Wireless Adapter ( based rt2870). I'm using it on ubuntu right now but it don't work in SL6.

I downloaded the linux driver and install it. But it's not working.

These my outputs..

Can anybody help me before I'm getting crazy:)??

CODE

[root@PackardBell Gorkem]# iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.
[root@PackardBell Gorkem]# iwconfig ra0
ra0       No such device

[root@PackardBell Gorkem]# uname -r
2.6.32-131.0.15.el6.i686
[root@PackardBell Gorkem]# lsmod |grep rt
parport_pc             19316  0
parport                31019  2 ppdev,parport_pc

[root@PackardBell Gorkem]# lsusb -v
Bus 001 Device 002: ID 083a:7511 Accton Technology Corp. Arcadyan 802.11N Wireless Adapter
Device Descriptor:
 bLength                18
 bDescriptorType         1
 bcdUSB               2.00
 bDeviceClass            0 (Defined at Interface level)
 bDeviceSubClass         0
 bDeviceProtocol         0
 bMaxPacketSize0        64
 idVendor           0x083a Accton Technology Corp.
 idProduct          0x7511 Arcadyan 802.11N Wireless Adapter
 bcdDevice            1.01
 iManufacturer           1 AirTies Wireless Networks
 iProduct                2 150 Mbps Wireless USB Adapter
 iSerial                 3
 bNumConfigurations      1
 Configuration Descriptor:
   bLength                 9
   bDescriptorType         2
   wTotalLength           67
   bNumInterfaces          1
   bConfigurationValue     1
   iConfiguration          0
   bmAttributes         0x80
     (Bus Powered)
   MaxPower              450mA
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       0
     bNumEndpoints           7
     bInterfaceClass       255 Vendor Specific Class
     bInterfaceSubClass    255 Vendor Specific Subclass
     bInterfaceProtocol    255 Vendor Specific Protocol
     iInterface              5
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x81  EP 1 IN
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0200  1x 512 bytes
       bInterval               0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x01  EP 1 OUT
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0200  1x 512 bytes
       bInterval               0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x02  EP 2 OUT
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0200  1x 512 bytes
       bInterval               0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x03  EP 3 OUT
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0200  1x 512 bytes
       bInterval               0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x04  EP 4 OUT
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0200  1x 512 bytes
       bInterval               0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x05  EP 5 OUT
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0200  1x 512 bytes
       bInterval               0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x06  EP 6 OUT
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0200  1x 512 bytes
       bInterval               0
Device Qualifier (for other device speed):
 bLength                10
 bDescriptorType         6
 bcdUSB               2.00
 bDeviceClass            0 (Defined at Interface level)
 bDeviceSubClass         0
 bDeviceProtocol         0
 bMaxPacketSize0        64
 bNumConfigurations      1
Device Status:     0x0000
 (Bus Powered)
PMEmail Poster
^
redman
 Posted: Sep 30 2011, 06:31 PM
Quote Post


SLF Admin
********

Group: Admins
Posts: 2006
Member No.: 2
Joined: 8-April 11









I'm not sure which Linux driver you downloaded,
but for SL6 you might want to try our the kmod-rt2870sta package from ELRepo.

Download these packages:
kmod-rt2870sta
rt2870-firmware

If you have a i386 system, look here.
if you have a x86_64 system, you need to look here.

Download the packages and install with "yum install kmod*.rpm rt2870*.rpm --nogpgcheck".


--------------------
What is SL? - Forum Rules - Info on 3rd Party Repos - How to post images - How to post large text / config files

Desktop: ASUS P5QPL-AM, Intel Dual-Core E6500, 4GB DDR2, ASUS GeForce GT 430 1GB, SL6.5 x86_64
Laptop: ASUS X58L, Intel Dual-Core T3200, 3GB DDR2, Intel GMA X3100, RHEL7.0 x86_64
Test box: Intel S5000PSL, 2x Intel Xeon E5310, 8GB ECC DDR2 FB-DIMM, ASUS GeForce GT 220 1GB, SL7 BETA x86_64 + MATE
PMEmail Poster
^
kuheylan
 Posted: Sep 30 2011, 08:32 PM
Quote Post


SLF Newbie


Group: Members
Posts: 11
Member No.: 888
Joined: 30-September 11









redman thanks for reply,

I installed these packages without error. But there is no difference sad.gif what do you think what's wrong about my situation?

CODE
[root@PackardBell Gorkem]# iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

[root@PackardBell Gorkem]# dmesg | grep rt
KERNEL supported cpus:
Movable zone start PFN for each node
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x808
Allocating PCI resources starting at 40000000 (gap: 40000000:bf780000)
Booting paravirtualized kernel on bare hardware
Enabling unmasked SIMD FPU exception support... done.
virtual kernel memory layout:
SELinux:  Starting in permissive mode
mce: CPU supports 5 MCE banks
ACPI: (supports S0 S3 S4 S5)
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: reg 10 io port: [0xbc00-0xbc07]
pci 0000:00:11.0: reg 14 io port: [0xb800-0xb803]
pci 0000:00:11.0: reg 18 io port: [0xb400-0xb407]
pci 0000:00:11.0: reg 1c io port: [0xb000-0xb003]
pci 0000:00:11.0: reg 20 io port: [0xac00-0xac0f]
pci 0000:00:11.0: supports D1 D2
pci 0000:00:12.0: reg 10 io port: [0xa800-0xa807]
pci 0000:00:12.0: reg 14 io port: [0xa400-0xa403]
pci 0000:00:12.0: reg 18 io port: [0xa000-0xa007]
pci 0000:00:12.0: reg 1c io port: [0x9c00-0x9c03]
pci 0000:00:12.0: reg 20 io port: [0x9800-0x980f]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: reg 10 io port: [0xb00-0xb0f]
pci 0000:00:14.1: reg 10 io port: [0x1f0-0x1f7]
pci 0000:00:14.1: reg 14 io port: [0x3f4-0x3f7]
pci 0000:00:14.1: reg 18 io port: [0x170-0x177]
pci 0000:00:14.1: reg 1c io port: [0x374-0x377]
pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
pci 0000:02:03.0: reg 10 io port: [0x8800-0x88ff]
pci 0000:02:03.0: supports D1 D2
pci 0000:02:03.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:02:04.0: reg 14 io port: [0x8c00-0x8c7f]
pci 0000:02:04.0: supports D2
pci 0000:02:04.0: PME# supported from D2 D3hot D3cold
pci 0000:00:14.4: bridge io port: [0x8000-0x8fff]
system 00:09: ioport range 0x4d0-0x4d1 has been reserved
system 00:09: ioport range 0x40b-0x40b has been reserved
system 00:09: ioport range 0x4d6-0x4d6 has been reserved
system 00:09: ioport range 0xc00-0xc01 has been reserved
system 00:09: ioport range 0xc14-0xc14 has been reserved
system 00:09: ioport range 0xc50-0xc51 has been reserved
system 00:09: ioport range 0xc52-0xc52 has been reserved
system 00:09: ioport range 0xc6c-0xc6c has been reserved
system 00:09: ioport range 0xc6f-0xc6f has been reserved
system 00:09: ioport range 0xcd4-0xcd5 has been reserved
system 00:09: ioport range 0xcd6-0xcd7 has been reserved
system 00:09: ioport range 0xcd8-0xcdf has been reserved
system 00:09: ioport range 0x800-0x89f has been reserved
system 00:09: ioport range 0x900-0x90f has been reserved
system 00:09: ioport range 0x910-0x91f has been reserved
system 00:0b: ioport range 0xe00-0xe7f has been reserved
- User ID: Red Hat Enterprise Linux Driver Update Program <secalert@redhat.com>
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
input: Macintosh mouse button emulation as /devices/virtual/input/input2
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: 8 ports detected
hub 2-0:1.0: 4 ports detected
hub 3-0:1.0: 4 ports detected
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram
Using IPI No-Shortcut mode
rtc_cmos 00:02: setting system clock to 2011-09-30 23:25:19 UTC (1317425119)
udev: starting version 147
[drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
Slow work thread pool: Starting up
dracut: Starting plymouth daemon
USB Mass Storage support registered.
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
readahead-collector: starting
udev: starting version 147
microcode: CPU0: AMD CPU family 0xf not supported
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
ppdev: user-space parallel port driver
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
readahead-collector: starting delayed service auditd
readahead-collector: sorting

[root@PackardBell Gorkem]# lsmod |grep rt
parport_pc             19316  0
parport                31019  2 ppdev,parport_pc




PMEmail Poster
^
redman
 Posted: Oct 1 2011, 08:18 AM
Quote Post


SLF Admin
********

Group: Admins
Posts: 2006
Member No.: 2
Joined: 8-April 11









QUOTE (kuheylan @ Sep 30 2011, 10:32 PM)
CODE
Booting paravirtualized kernel on bare hardware

Are you running SL on a virtual system?


--------------------
What is SL? - Forum Rules - Info on 3rd Party Repos - How to post images - How to post large text / config files

Desktop: ASUS P5QPL-AM, Intel Dual-Core E6500, 4GB DDR2, ASUS GeForce GT 430 1GB, SL6.5 x86_64
Laptop: ASUS X58L, Intel Dual-Core T3200, 3GB DDR2, Intel GMA X3100, RHEL7.0 x86_64
Test box: Intel S5000PSL, 2x Intel Xeon E5310, 8GB ECC DDR2 FB-DIMM, ASUS GeForce GT 220 1GB, SL7 BETA x86_64 + MATE
PMEmail Poster
^
kuheylan
 Posted: Oct 1 2011, 08:35 AM
Quote Post


SLF Newbie


Group: Members
Posts: 11
Member No.: 888
Joined: 30-September 11









wacko.gif what do you mean "virtual system"? If you mean virtual machine, no it's not. I'm running it on my home desktop pc.
PMEmail Poster
^
redman
 Posted: Oct 1 2011, 01:50 PM
Quote Post


SLF Admin
********

Group: Admins
Posts: 2006
Member No.: 2
Joined: 8-April 11









QUOTE (kuheylan @ Sep 30 2011, 10:32 PM)
CODE
Booting paravirtualized kernel on bare hardware

In the text you posted was a remark on booting a paravirtualized kernel.
That gave me the impression you're running a virtual system.


--------------------
What is SL? - Forum Rules - Info on 3rd Party Repos - How to post images - How to post large text / config files

Desktop: ASUS P5QPL-AM, Intel Dual-Core E6500, 4GB DDR2, ASUS GeForce GT 430 1GB, SL6.5 x86_64
Laptop: ASUS X58L, Intel Dual-Core T3200, 3GB DDR2, Intel GMA X3100, RHEL7.0 x86_64
Test box: Intel S5000PSL, 2x Intel Xeon E5310, 8GB ECC DDR2 FB-DIMM, ASUS GeForce GT 220 1GB, SL7 BETA x86_64 + MATE
PMEmail Poster
^
kuheylan
 Posted: Oct 1 2011, 02:08 PM
Quote Post


SLF Newbie


Group: Members
Posts: 11
Member No.: 888
Joined: 30-September 11









QUOTE (redman @ Oct 1 2011, 01:50 PM)
QUOTE (kuheylan @ Sep 30 2011, 10:32 PM)
CODE
Booting paravirtualized kernel on bare hardware

In the text you posted was a remark on booting a paravirtualized kernel.
That gave me the impression you're running a virtual system.


so what should I do now?? I'm confused cuz it's working fine on ubuntu so it should be work in SL I think.

Edit: I solved it with this solution (http://forums.fedoraforum.org/showthread.php?t=197413) installing rt3070 driver. Weird but it work's.
PMEmail Poster
^
kuheylan
 Posted: Mar 10 2012, 11:25 AM
Quote Post


SLF Newbie


Group: Members
Posts: 11
Member No.: 888
Joined: 30-September 11









It's not working on SL6.2 with rt2870 or rt3070. Continuously asking wireless password (WPA)... http://dl.dropbox.com/u/2835777/BangHead1.gif
PMEmail Poster
^
0 User(s) are reading this topic (0 Guests and 0 Anonymous Users)
0 Members:

Topic Options Reply to this topicStart new topicStart Poll